All docs

Live Activities on your Lock Screen

When the departure and arrival cards appear on your Lock Screen, what each element means, and how to complete a flight from the card.

On this page

For a flight Jetlog tracks, a card appears on your Lock Screen before departure and another before arrival. Jetlog starts, updates and ends them for you. A separate progress card appears while an AI scan uploads, and it is not covered here.

When the cards start and end #

Card Starts Ends
Departure 90 minutes before scheduled off-blocks At pushback, then a "Departed" card stays for about 15 minutes
Arrival 30 minutes before the expected on-blocks, or at once if you have already landed When you complete the flight, or 45 minutes after arrival

There is no card during the cruise, and never two at once. The arrival card replaces a "Departed" card that is still showing. If no off-blocks is ever reported, the departure card ends 30 minutes after the planned off-blocks. A card also ends when the flight is completed or deleted on any of your devices.

A card needs a flight with a scheduled off-blocks time, from live tracking or a roster import. A flight you typed in by hand without a scheduled departure has nothing to start from. Simulator sessions get no departure card, only a prompt to complete the session when it is due to end.

What the departure card shows #

The flight Live Activity on the Lock Screen before departure.
The departure card with stand, delay status and the TSAT countdown.
  • Top row. Flight number and route. The yellow pill is the stand, or the gate if only a gate is known. A small pill with a door icon shows the gate when it differs from the stand.
  • Second row. Registration and aircraft type. The pill with a departing plane is the departure runway, when known.
  • Large time. The estimated off-blocks time, or the scheduled one if there is no estimate. Times are UTC and end in z, for example 19:12z.
  • Delay status. A red Delayed +N pill (in minutes, or like Delayed +1h15 from an hour up) when the estimate is later than the schedule, with the scheduled time struck through. A green On time pill when the estimate is equal or earlier. No pill without an estimate.
  • CTOT, TTOT and ETOT. An orange CTOT chip when a slot exists. Next to it TTOT in orange once issued, otherwise ETOT in grey. These appear where the airport supplies the data.
  • Bottom row, with a TSAT. An orange TSAT chip, a "TSAT in mm:ss" countdown and a bar from 15 minutes before TSAT to 5 minutes after. Once the TSAT has passed it reads In TSAT window.
  • Bottom row, without a TSAT. A blue EOBT chip, "Departure in mm:ss" and a bar for the last 30 minutes. At the time it reads Departing.
  • After pushback. The bottom row becomes Departed.

Tap the card to open the flight.

What the arrival card shows #

The flight Live Activity on the Lock Screen on the way to the arrival airport.
The arrival card with the four block times and the Complete button.

Four columns in the order of the flight detail: Off-blocks, Airborne, Touchdown and On-blocks. A white time is an actual time. An orange time is captioned "estimated", or "scheduled" for the block times. Below the grid are the take-off and landing switch and a green Complete button, for the whole arrival phase. After on-blocks the Dynamic Island reads "Complete your flight".

Complete a flight from the card #

  1. On the arrival card, check the switch. It reads T/O + LDG when off and 1 T/O · 1 LDG when on.
  2. Flip it on to count one take-off and one landing.
  3. Tap Complete.

The card shows a green Completed badge and goes away. The flight is completed with the times Jetlog already has, without opening the app, and syncs like any other change.

The switch only ever counts exactly one take-off and one landing. If the flight already holds other counts, for example 2 take-offs and 2 landings, it becomes a read-only pill such as 2 T/O · 2 LDG, and tapping it opens the flight. A simulator session shows Review session and Complete instead.

If you do not complete it from the card, the flight stays in your logbook and you complete it in the app, from the notification or from your Apple Watch.

Dynamic Island and Apple Watch #

On an iPhone with a Dynamic Island the compact view shows the flight number and time, the TSAT in its window, and the ETA on the arrival card. Expanded, it shows the route, stand, runway and countdown, and on the arrival card the switch and Complete. Other iPhones show only the Lock Screen card.

On a paired Apple Watch the card appears in the Smart Stack as a small card with a countdown and no buttons. During the complete prompt, tapping it opens the complete screen on the watch.

Turn Live Activities on or off #

There is no switch per flight. Allow or block Live Activities and Notifications for Jetlog in the iOS Settings app. In Jetlog, Settings > Notifications shows whether each is Enabled or Disabled, and an Action Required section with Open Settings when one is off.

Why no card appeared #

  • Notifications or Live Activities are off for Jetlog in iOS Settings.
  • The flight has no scheduled departure time yet, because it was typed in by hand or is not yet matched to live tracking or a roster.
  • It is too early. The departure card starts 90 minutes before scheduled off-blocks.
  • The flight is already completed or deleted.
  • Your phone was offline when Jetlog tried to start the card.
  • You are signed out, or the device was removed from your account. See Sync and your devices.

For tracking coverage see How automatic flight tracking works.

Still stuck? Write to support and a pilot answers.